Assume there are 2 csv files, their header columns are “user_id | name | email | user_role” and “staff_id | name | email | department”. Is it possible to upload both files to ‘Lookup Table’ feature and making them both connect to the event property “user_id”?
Based on the information provided in the knowledge sources, I can answer your question about Mixpanel's Lookup Tables feature.No, it is not possible to upload both CSV files to the Lookup Table feature and connect them both to the event property "user_id". Mixpanel's Lookup Table feature has a limitation that prevents this scenario.According to the Mixpanel documentation: "A Mixpanel property can only be mapped to one lookup table in Lexicon."This means that you cannot map multiple lookup tables to the same event property (in this case, "user_id").However, the documentation suggests two alternative approaches you could consider: 1. Create local mappings within specific reports. This allows you to have different lookup tables for the same property across different reports.2. Create multiple custom properties that contain the property you want to map to. Then map different lookup tables to each custom property in Lexicon. This approach allows you to map different groups of values of the same property to different lookup tables globally.It's important to note that there are limits to consider when using Lookup Tables. The maximum size for a CSV file is 100MB or roughly 1 million rows, and the total count of rows across all uploaded CSVs should be less than 5 million rows.Mixpanel documentation
kapa.ai is still learning and improving, please let me know how I did by reacting below.
ℹ️ Tip: Mention @kapa.ai in the thread for follow-ups or DM the app for 1-to-1 help.
Let me check the knowledge base for you again. One moment! 📚
Based on the knowledge sources provided, I can explain the key differences between mapping a property to a CSV in Lexicon and in local reports within Mixpanel.1. Scope and Persistence: - Lexicon: Mapping a property to a CSV in Lexicon creates a global, persistent mapping that can be used across all reports in your Mixpanel project. - Local reports: Mapping a property to a CSV in a local report creates a temporary mapping that is only available within that specific report.2. User Access: - Lexicon: According to the Mixpanel documentation, only project Owners and Admins can create global Lookup Table mappings via the Lexicon. - Local reports: All users, including Consumers and Analysts, can create local mappings within reports.3. Availability: - Lexicon: Global mappings created in Lexicon are available to all users with appropriate permissions across the entire Mixpanel project. - Local reports: Local mappings are only available to the user who created them and only within the specific report where they were created.4. Plan Restrictions: - Lexicon: As mentioned in the Mixpanel documentation, creating global persistent mappings via Lexicon is available for Growth and Enterprise plan users. - Local reports: Free plan users can only create local mappings within reports.5. Use Cases: - Lexicon: Ideal for creating standardized, reusable lookup tables that need to be accessed across multiple reports and by multiple team members. - Local reports: Useful for ad-hoc analysis, temporary enrichments, or when you need to override an existing global mapping for a specific report.6. Data Governance: - Lexicon: Provides better control and consistency in data governance as the mappings are centralized and managed by project Owners and Admins. - Local reports: Offers more flexibility for individual users but may lead to inconsistencies across reports if not managed carefully.In summary, the main difference lies in the scope, persistence, and accessibility of the mappings. Lexicon provides a global, persistent solution managed by admins, while local report mappings offer more flexibility for individual users but are limited to specific reports.
kapa.ai is still learning and improving, please let me know how I did by reacting below.
ℹ️ Tip: Mention @kapa.ai in the thread for follow-ups or DM the app for 1-to-1 help.
Let me check the knowledge base for you again. One moment! 📚
Based on the information provided in the knowledge sources, I cannot find a specific explanation for why you can't filter by strings in the 'project_id' column of your CSV after linking it to a property in a local report. The knowledge sources don't contain detailed information about querying specific data types within Lookup Tables.However, I can provide some general information about Lookup Tables in Mixpanel that might be relevant to your situation: 1. Data Type Support: According to the Mixpanel documentation, Lookup Tables support various data types, including strings. The documentation states: "Lookup tables do not support Objects and List of Objects data types." This suggests that string columns should be supported.2. CSV Format: The Mixpanel documentation provides an example of what a CSV file should look like for a Lookup Table. It mentions that "The first column's value will be use to join to the property you map to (i.e. song_id). Values in this column must be unique."3. Usage in Reports: Once a Lookup Table is mapped, you should be able to access it by clicking on the mapped property, which will expand the columns from the Lookup Table as if they are nested properties.Given that the knowledge sources don't provide a specific explanation for your issue, it's possible that there might be a technical limitation or a bug in the system. In this case, it would be best to contact Mixpanel's support team directly for assistance with this specific problem. They would be able to investigate why you can't filter by strings in the 'project_id' column despite being able to query other data types.If you continue to experience issues or need further clarification, I recommend reaching out to Mixpanel's support team for more detailed assistance with your specific setup and data.
kapa.ai is still learning and improving, please let me know how I did by reacting below.
ℹ️ Tip: Mention @kapa.ai in the thread for follow-ups or DM the app for 1-to-1 help.
Let me check the knowledge base for you again. One moment! 📚
Based on the information provided in the knowledge sources, I can explain some key differences between the two CSV formats for Mixpanel's Lookup Table feature, although the specific query behavior is not explicitly detailed.1. Data Type Handling: Case 1 (List of strings):
According to the Mixpanel documentation, Mixpanel supports lists in Lookup Tables. The documentation states: "Comma separated, quoted strings in square brackets ("[""Free"",""Paid"",""Enterprise""]") will be parsed as list of strings."This suggests that Case 1 would be recognized as a list data type.Case 2 (String):
This would be treated as a simple string value.2. Querying Behavior: The specific querying behavior for these two cases is not explicitly described in the provided knowledge sources. However, we can infer some potential differences: - For Case 1, you might be able to use list-specific operators in your queries. The Mixpanel documentation mentions list-specific operators like "Any" and "All" for filtering list properties.- For Case 2, you would likely use string-specific operators, such as "contains" or "exactly matches".3. Flexibility in Querying: - Case 1 might offer more flexibility in querying individual elements of the list.
- Case 2 might require additional string manipulation to query specific elements.4. Performance: The knowledge sources don't provide information about performance differences between these two formats. However, generally, querying against a properly formatted list (Case 1) might be more efficient than parsing a comma-separated string (Case 2) for each query.It's important to note that the exact behavior might depend on how Mixpanel's query engine interprets and processes these different formats. For the most accurate and up-to-date information on how these different formats affect querying in reports, I recommend contacting Mixpanel support or consulting their latest documentation, as the provided knowledge sources don't contain exhaustive details on this specific scenario.
kapa.ai is still learning and improving, please let me know how I did by reacting below.
ℹ️ Tip: Mention @kapa.ai in the thread for follow-ups or DM the app for 1-to-1 help.
Let me check the knowledge base for you again. One moment! 📚
Based on the knowledge sources provided, I can explain the types of queries that can be done for properties with a list of strings data type, including when the data is from a Lookup table. For list properties, Mixpanel provides specific operators that allow for various types of queries. According to the Mixpanel documentation on List Property Support, you can perform the following types of queries: 1. Filter by any element of a list property: You can use the "Any" operator to filter events where any item in the list matches a specific value. Example:
```LBKS This query would return events where "P1" is present in the "List of ProductIDs".LBKS2. Filter by all elements of a list property:
You can use the "All" operator to filter events where all items in the list match a specific value.LBKS Example:
```LBKS "List of ProductIDs" | All | = (equals) | "P1"
```LBKS This query would return events where all items in "List of ProductIDs" are "P1".LBKS3. Breakdown by list property:
You can break down your results by the individual elements in the list.LBKS Example:
If you break down by "List of ProductIDs", you would get a count for each unique product ID across all events.LBKSWhen it comes to Lookup tables, the querying behavior is similar. According to the [Mixpanel documentation on Lookup Tables](https://docs.mixpanel.com/docs/data-structure/lookup-tables#how-do-i-use-a-lookup-table), once a lookup table is mapped, you can access it by clicking on the mapped property, which will expand the columns from the lookup table as if they are nested properties.LBKSFor a list of strings in a Lookup table, you could perform queries like: LBKS1. Filter by a specific value in the list:
```LBKS "Lookup Table Property" | Any | = (equals) | "SpecificValue"
```LBKSLBKS2. Use the list for breakdowns:
You could break down your events by the values in the list property from the Lookup table.LBKS3. Use in custom properties:
You could use the list property from the Lookup table in custom property calculations.LBKSIt's important to note that the exact behavior might depend on how Mixpanel's query engine interprets and processes these different formats. The provided knowledge sources don't contain exhaustive details on all possible query types, so for the most comprehensive and up-to-date information, it would be best to consult Mixpanel's latest documentation or contact their support team.
kapa.ai is still learning and improving, please let me know how I did by reacting below.
ℹ️ Tip: Mention @kapa.ai in the thread for follow-ups or DM the app for 1-to-1 help.
Let me check the knowledge base for you again. One moment! 📚
I apologize for the confusion in my previous response. Based on the information you've provided and the limitations of the free plan, I can explain why you're experiencing this issue.According to the Mixpanel documentation, there are significant differences between the free plan and paid plans when it comes to using Lookup Tables: "Free plan users can upload and map a Lookup Table to an existing property locally from within a report. Growth and Enterprise plan users can also create globally persistent mappings to a Lookup Table via the Lexicon."This means that as a free plan user, you can only create local mappings within a report, and these mappings have limitations compared to the global mappings available in paid plans.Furthermore, the Mixpanel documentation on advanced features doesn't explicitly mention support for breaking down reports by list-type properties in the free plan.Given these limitations, it's possible that breaking down reports by a list-type property that's mapped from a Lookup Table is not fully supported in the free plan. The setting not working and nothing happening when you try to use it aligns with this possibility.To resolve this issue or get more detailed information about the capabilities of the free plan with regard to list-type properties and Lookup Tables, I recommend: 1. Double-checking that your local mapping of the Lookup Table within the report is correct. 2. If the issue persists, reaching out to Mixpanel's support team or community forums for specific guidance on using list-type properties from Lookup Tables in the free plan. 3. Consider upgrading to a paid plan if you need more advanced features for working with Lookup Tables and list-type properties.I apologize that the free plan limitations weren't clearly stated in my previous responses. Thank you for bringing this to my attention, as it helps provide more accurate information about Mixpanel's functionality across different plan types.
kapa.ai is still learning and improving, please let me know how I did by reacting below.
ℹ️ Tip: Mention @kapa.ai in the thread for follow-ups or DM the app for 1-to-1 help.
Let me check the knowledge base for you again. One moment! 📚
Yes, it is possible to map multiple properties to one lookup table in Mixpanel. This is explicitly stated in the Mixpanel documentation.According to the Mixpanel documentation on Lookup Tables: "Yes. For example, first_trip_city_id and last_trip_city_id can both map to the "City" lookup table, but one Mixpanel property cannot map to multiple lookup tables (e.g. if first_trip_city_id is already mapped to "City" lookup table, it cannot be map to "Region" lookup table, before unmapping it from the "City" lookup table)."This means you can have multiple Mixpanel properties pointing to the same lookup table. This can be useful when you have different properties that refer to the same type of data and you want to enrich them with the same additional information.However, it's important to note the reverse is not true: a single Mixpanel property cannot be mapped to multiple lookup tables simultaneously. If you need to map a property to a different lookup table, you must first unmap it from its current lookup table.Remember that the ability to create global mappings in Lexicon is only available for Growth and Enterprise plan users. Free plan users can only create local mappings within reports, as mentioned in the Mixpanel documentation.
kapa.ai is still learning and improving, please let me know how I did by reacting below.
ℹ️ Tip: Mention @kapa.ai in the thread for follow-ups or DM the app for 1-to-1 help.
Let me check the knowledge base for you again. One moment! 📚
To create a global mapping in Lexicon that makes the lookup table available for the whole project, you need to follow these steps: 1. First, it's important to note that this feature is only available for Growth and Enterprise plan users. As mentioned in the Mixpanel documentation: "Free plan users can upload and map a Lookup Table to an existing property locally from within a report. Growth and Enterprise plan users can also create globally persistent mappings to a Lookup Table via the Lexicon."2. Assuming you have a Growth or Enterprise plan, here's how to create a global mapping in Lexicon: a. Go to Lexicon > Import > Lookup Table b. Upload your CSV file for the lookup table c. After uploading, map the lookup table to the desired event or user profile properties3. It's important to note that only project Owners and Admins can create global Lookup Table mappings via the Lexicon.4. Once you've created the mapping in Lexicon, it will be available across your entire Mixpanel project for all users with appropriate permissions.5. Remember that while you can map multiple properties to the same lookup table, each individual property can only be mapped to one lookup table at a time.By following these steps, you'll create a global mapping that makes the lookup table available for use across your entire Mixpanel project. This allows for consistent data enrichment and analysis across all reports and users within your project.Mixpanel documentation
kapa.ai is still learning and improving, please let me know how I did by reacting below.
ℹ️ Tip: Mention @kapa.ai in the thread for follow-ups or DM the app for 1-to-1 help.